5个回答
53
Linux
正如您建议的那样，在Linux上使用fcntl是实现此目的的方法。 您要翻译的C代码如下：
static struct hd_driveid hd;
int fd;
if ((fd = open("/dev/hda", O_RDONLY | O_NONBLOCK)) < 0) {
printf("ERROR opening /dev/hda\n");
exit(1);
}
if (!ioctl(fd, HDIO_GET_IDENTITY, &hd)) {
printf("%.20s\n", hd.serial_no);
} else if (errno == -ENOMSG) {
printf("No serial number available\n");
} else {
perror("ERROR: HDIO_GET_IDENTITY");
exit(1);
}
在 Ubuntu 9.10 上翻译成 Python，大致如下：
import sys, os, fcntl, struct
if os.geteuid() > 0:
print("ERROR: Must be root to use")
sys.exit(1)
with open(sys.argv[1], "rb") as fd:
# tediously derived from the monster struct defined in <hdreg.h>
# see comment at end of file to verify
hd_driveid_format_str = "@ 10H 20s 3H 8s 40s 2B H 2B H 4B 6H 2B I 36H I Q 152H"
# Also from <hdreg.h>
HDIO_GET_IDENTITY = 0x030d
# How big a buffer do we need?
sizeof_hd_driveid = struct.calcsize(hd_driveid_format_str)
# ensure our format string is the correct size
# 512 is extracted using sizeof(struct hd_id) in the c code
assert sizeof_hd_driveid == 512
# Call native function
buf = fcntl.ioctl(fd, HDIO_GET_IDENTITY, " " * sizeof_hd_driveid)
fields = struct.unpack(hd_driveid_format_str, buf)
serial_no = fields[10].strip()
model = fields[15].strip()
print("Hard Disk Model: %s" % model)
print(" Serial Number: %s" % serial_no)
## For documentation purposes, this is the struct copied from <hdreg.h>
# struct hd_driveid {
# unsigned short config; /* lots of obsolete bit flags */
# unsigned short cyls; /* Obsolete, "physical" cyls */
# unsigned short reserved2; /* reserved (word 2) */
# unsigned short heads; /* Obsolete, "physical" heads */
# unsigned short track_bytes; /* unformatted bytes per track */
# unsigned short sector_bytes; /* unformatted bytes per sector */
# unsigned short sectors; /* Obsolete, "physical" sectors per track */
# unsigned short vendor0; /* vendor unique */
# unsigned short vendor1; /* vendor unique */
# unsigned short vendor2; /* Retired vendor unique */
# unsigned char serial_no[20]; /* 0 = not_specified */
# unsigned short buf_type; /* Retired */
# unsigned short buf_size; /* Retired, 512 byte increments
# * 0 = not_specified
# */
# unsigned short ecc_bytes; /* for r/w long cmds; 0 = not_specified */
# unsigned char fw_rev[8]; /* 0 = not_specified */
# unsigned char model[40]; /* 0 = not_specified */
# unsigned char max_multsect; /* 0=not_implemented */
# unsigned char vendor3; /* vendor unique */
# unsigned short dword_io; /* 0=not_implemented; 1=implemented */
# unsigned char vendor4; /* vendor unique */
# unsigned char capability; /* (upper byte of word 49)
# * 3: IORDYsup
# * 2: IORDYsw
# * 1: LBA
# * 0: DMA
# */
# unsigned short reserved50; /* reserved (word 50) */
# unsigned char vendor5; /* Obsolete, vendor unique */
# unsigned char tPIO; /* Obsolete, 0=slow, 1=medium, 2=fast */
# unsigned char vendor6; /* Obsolete, vendor unique */
# unsigned char tDMA; /* Obsolete, 0=slow, 1=medium, 2=fast */
# unsigned short field_valid; /* (word 53)
# * 2: ultra_ok word 88
# * 1: eide_ok words 64-70
# * 0: cur_ok words 54-58
# */
# unsigned short cur_cyls; /* Obsolete, logical cylinders */
# unsigned short cur_heads; /* Obsolete, l heads */
# unsigned short cur_sectors; /* Obsolete, l sectors per track */
# unsigned short cur_capacity0; /* Obsolete, l total sectors on drive */
# unsigned short cur_capacity1; /* Obsolete, (2 words, misaligned int) */
# unsigned char multsect; /* current multiple sector count */
# unsigned char multsect_valid; /* when (bit0==1) multsect is ok */
# unsigned int lba_capacity; /* Obsolete, total number of sectors */
# unsigned short dma_1word; /* Obsolete, single-word dma info */
# unsigned short dma_mword; /* multiple-word dma info */
# unsigned short eide_pio_modes; /* bits 0:mode3 1:mode4 */
# unsigned short eide_dma_min; /* min mword dma cycle time (ns) */
# unsigned short eide_dma_time; /* recommended mword dma cycle time (ns) */
# unsigned short eide_pio; /* min cycle time (ns), no IORDY */
# unsigned short eide_pio_iordy; /* min cycle time (ns), with IORDY */
# unsigned short words69_70[2]; /* reserved words 69-70
# * future command overlap and queuing
# */
# unsigned short words71_74[4]; /* reserved words 71-74
# * for IDENTIFY PACKET DEVICE command
# */
# unsigned short queue_depth; /* (word 75)
# * 15:5 reserved
# * 4:0 Maximum queue depth -1
# */
# unsigned short words76_79[4]; /* reserved words 76-79 */
# unsigned short major_rev_num; /* (word 80) */
# unsigned short minor_rev_num; /* (word 81) */
# unsigned short command_set_1; /* (word 82) supported
# * 15: Obsolete
# * 14: NOP command
# * 13: READ_BUFFER
# * 12: WRITE_BUFFER
# * 11: Obsolete
# * 10: Host Protected Area
# * 9: DEVICE Reset
# * 8: SERVICE Interrupt
# * 7: Release Interrupt
# * 6: look-ahead
# * 5: write cache
# * 4: PACKET Command
# * 3: Power Management Feature Set
# * 2: Removable Feature Set
# * 1: Security Feature Set
# * 0: SMART Feature Set
# */
# unsigned short command_set_2; /* (word 83)
# * 15: Shall be ZERO
# * 14: Shall be ONE
# * 13: FLUSH CACHE EXT
# * 12: FLUSH CACHE
# * 11: Device Configuration Overlay
# * 10: 48-bit Address Feature Set
# * 9: Automatic Acoustic Management
# * 8: SET MAX security
# * 7: reserved 1407DT PARTIES
# * 6: SetF sub-command Power-Up
# * 5: Power-Up in Standby Feature Set
# * 4: Removable Media Notification
# * 3: APM Feature Set
# * 2: CFA Feature Set
# * 1: READ/WRITE DMA QUEUED
# * 0: Download MicroCode
# */
# unsigned short cfsse; /* (word 84)
# * cmd set-feature supported extensions
# * 15: Shall be ZERO
# * 14: Shall be ONE
# * 13:6 reserved
# * 5: General Purpose Logging
# * 4: Streaming Feature Set
# * 3: Media Card Pass Through
# * 2: Media Serial Number Valid
# * 1: SMART selt-test supported
# * 0: SMART error logging
# */
# unsigned short cfs_enable_1; /* (word 85)
# * command set-feature enabled
# * 15: Obsolete
# * 14: NOP command
# * 13: READ_BUFFER
# * 12: WRITE_BUFFER
# * 11: Obsolete
# * 10: Host Protected Area
# * 9: DEVICE Reset
# * 8: SERVICE Interrupt
# * 7: Release Interrupt
# * 6: look-ahead
# * 5: write cache
# * 4: PACKET Command
# * 3: Power Management Feature Set
# * 2: Removable Feature Set
# * 1: Security Feature Set
# * 0: SMART Feature Set
# */
# unsigned short cfs_enable_2; /* (word 86)
# * command set-feature enabled
# * 15: Shall be ZERO
# * 14: Shall be ONE
# * 13: FLUSH CACHE EXT
# * 12: FLUSH CACHE
# * 11: Device Configuration Overlay
# * 10: 48-bit Address Feature Set
# * 9: Automatic Acoustic Management
# * 8: SET MAX security
# * 7: reserved 1407DT PARTIES
# * 6: SetF sub-command Power-Up
# * 5: Power-Up in Standby Feature Set
# * 4: Removable Media Notification
# * 3: APM Feature Set
# * 2: CFA Feature Set
# * 1: READ/WRITE DMA QUEUED
# * 0: Download MicroCode
# */
# unsigned short csf_default; /* (word 87)
# * command set-feature default
# * 15: Shall be ZERO
# * 14: Shall be ONE
# * 13:6 reserved
# * 5: General Purpose Logging enabled
# * 4: Valid CONFIGURE STREAM executed
# * 3: Media Card Pass Through enabled
# * 2: Media Serial Number Valid
# * 1: SMART selt-test supported
# * 0: SMART error logging
# */
# unsigned short dma_ultra; /* (word 88) */
# unsigned short trseuc; /* time required for security erase */
# unsigned short trsEuc; /* time required for enhanced erase */
# unsigned short CurAPMvalues; /* current APM values */
# unsigned short mprc; /* master password revision code */
# unsigned short hw_config; /* hardware config (word 93)
# * 15: Shall be ZERO
# * 14: Shall be ONE
# * 13:
# * 12:
# * 11:
# * 10:
# * 9:
# * 8:
# * 7:
# * 6:
# * 5:
# * 4:
# * 3:
# * 2:
# * 1:
# * 0: Shall be ONE
# */
# unsigned short acoustic; /* (word 94)
# * 15:8 Vendor's recommended value
# * 7:0 current value
# */
# unsigned short msrqs; /* min stream request size */
# unsigned short sxfert; /* stream transfer time */
# unsigned short sal; /* stream access latency */
# unsigned int spg; /* stream performance granularity */
# unsigned long long lba_capacity_2;/* 48-bit total number of sectors */
# unsigned short words104_125[22];/* reserved words 104-125 */
# unsigned short last_lun; /* (word 126) */
# unsigned short word127; /* (word 127) Feature Set
# * Removable Media Notification
# * 15:2 reserved
# * 1:0 00 = not supported
# * 01 = supported
# * 10 = reserved
# * 11 = reserved
# */
# unsigned short dlf; /* (word 128)
# * device lock function
# * 15:9 reserved
# * 8 security level 1:max 0:high
# * 7:6 reserved
# * 5 enhanced erase
# * 4 expire
# * 3 frozen
# * 2 locked
# * 1 en/disabled
# * 0 capability
# */
# unsigned short csfo; /* (word 129)
# * current set features options
# * 15:4 reserved
# * 3: auto reassign
# * 2: reverting
# * 1: read-look-ahead
# * 0: write cache
# */
# unsigned short words130_155[26];/* reserved vendor words 130-155 */
# unsigned short word156; /* reserved vendor word 156 */
# unsigned short words157_159[3];/* reserved vendor words 157-159 */
# unsigned short cfa_power; /* (word 160) CFA Power Mode
# * 15 word 160 supported
# * 14 reserved
# * 13
# * 12
# * 11:0
# */
# unsigned short words161_175[15];/* Reserved for CFA */
# unsigned short words176_205[30];/* Current Media Serial Number */
# unsigned short words206_254[49];/* reserved words 206-254 */
# unsigned short integrity_word; /* (word 255)
# * 15:8 Checksum
# * 7:0 Signature
# */
# };
抱歉内容有些长，但我认为将原始的C结构体作为注释包含进来是有用的。此外，我对fcntl和struct模块都不是很熟悉，所以可能会做一些不符合惯例的事情。无论如何，如果以root权限从命令行运行，它看起来会像这样（我已经删除了我的确切序列号以保护隐私）：
fmark@fmark-laptop:~/Desktop/hdserial$ sudo python hd.py "/dev/sda"
Hard Disk Model: FUJITSU MHV2080BH PL
Serial Number: NW--------
这里发生了什么？
为了能够理解这里正在发生什么，您需要查看原始C程序中的
#include <linux/hdreg.h>。这个包含导入了HDIO_GET_IDENTITY常量和struct hd_driveid。我已经将该结构体复制为Python源代码中的注释，因此在此不再重复。要找出HDIO_GET_IDENTITY的情况，可以在源代码中搜索它（在Ubuntu上，这在/usr/include/linux/hdreg.h）。您应该会找到类似于以下内容： #define HDIO_GET_IDENTITY 0x030d /* get IDE identification info */
因此，您会发现
HDIO_GET_IDENTITY只是一个常量，告诉fcntl您有兴趣获取硬盘信息。正如您所注意到的那样，相同的值（0x030d是十六进制表示的整数）被分配给Python代码中的变量。
Windows
我现在意识到您对Linux感兴趣，但我将保留这里以供后人参考。以下内容将在Windows上获取HDD序列号（您需要安装wmi包）：import wmi
c = wmi.WMI()
for item in c.Win32_PhysicalMedia():
print item
- fmark
4
找一个螺丝刀并打开机箱 ;-)
如果你在使用Windows系统，这可能会起到作用
import win32api
print win32api.GetVolumeInformation("C:\\")
为此，您需要获取适用于Windows的Mark Hammond模块 http://python.net/crew/mhammond/
- Fredrik Pihl
3
在Windows上，您也可以使用内置的
如果您还需要其他信息，例如索引和制造商：
subprocess来获取它！import subprocess
serials = subprocess.check_output('wmic diskdrive get SerialNumber').decode().split('\n')[1:]
serials = [s.strip() for s in serials if s.strip()]
如果您还需要其他信息，例如索引和制造商：
import subprocess
serials = subprocess.check_output('wmic diskdrive get Index, SerialNumber, Manufacturer').decode().split('\n')[1:]
有关可用属性的列表，请查看此文档。
- Anthony
1
Windows
def get_serial_number_of_physical_disk(drive_letter='C:'):
import wmi
c = wmi.WMI()
logical_disk = c.Win32_LogicalDisk(Caption=drive_letter)[0]
partition = logical_disk.associators()[1]
physical_disc = partition.associators()[0]
return physical_disc.SerialNumber
例如：
get_serial_number_of_physical_disk(os.getenv('SystemDrive'))
将为您提供包含逻辑系统驱动器的磁盘序列号。
- Ahmet Yıldırım
0
适用于Windows
import os
data = os.popen('vol '+'c:', 'r').read()
data = data.split()
print(data[len(data)-1:])
- alireza jahani
网页内容由stack overflow 提供, 点击上面的可以查看英文原文，
原文链接
原文链接